Taillieu.Info

Wireless Communication: NRF905 QPSK Transceiver (433MHz)

Relay's: relay arduino

Sensors: LDR (light-dependent resistor), PIR - Passive Infrared Sensor, DS18B20 digital thermometer

Instructions: WebCom Instructions

WebInterface: 192.168.0.10

Compiling 'WebCom_2015' for 'Arduino Mega w/ ATmega2560 (Mega 2560)'
Binary sketch size: 41,192 bytes (used 16% of a 253,952 byte maximum) (1.02 secs)
Minimum Memory Usage: 3332 bytes (41% of a 8192 byte maximum)
Uploading to I/O board using 'COM19'
Done uploading
-----------------------------
This build would be faster if you upgraded to Visual Micro Gold Edition + USB debugger http://www.visualmicro.com
Please wait ...
Compiling 'WebCom_2015' for 'Arduino Mega ADK'
Binary sketch size: 42,682 bytes (used 17% of a 253,952 byte maximum) (6.39 secs)
Minimum Memory Usage: 3536 bytes (43% of a 8192 byte maximum)
Uploading to I/O board using 'COM19'
Done uploading

WebCom_2015 B01.04
4831
$22$00$76$3B$00$00$01$01$00$00$21$00$00$00$7A$2C$01$00$00$01$00$00$38$36$00$FC$23$25$79$00$00$00$00$01$00$00$00$37$62$00$22$00$7B$20$8C$62$17$01$00$00$3A$37$00$04$24$00$75$62$40$00$00$01$00$00$3B$37$00$04$00$00$76$00$00$00$00$01$00$00$3C$37$00$04$00$00$77$20$8C$00$00$00$00$00$A0$41$CD$CC$CC$3E$38$88$13$36$37$38$39$3A$3B$3C$3D$F3$F3$6C$10$0C$C0$A8$03$01$01$00$00$50$00$C0$A8$00$0A$37$01
Start Ethernet...
server is at 192.168.0.10:80
api.thingspeak.com
KRR9Q1VJX3MPO58E
field7=4826.00
4826.00
field6=20.81
20.81
----------------------------
Opening port
Port open
WebCom_2015 B01.03
<<< Start initialization >>>
freeMemory=4627
129
Read Config data from Eeprom...
MyID=34
WebComConfig=
$22$00$76$3B$00$00$01$01$00$00$21$00$00$00$78$2C$01$00$00$01$00$00$38$36$00$FC$00$00$79$00$00$00$00$01$00$00$39$37$00$04$00$00$00$62$41$00$00$01$00$00$3A$37$00$04$00$00$00$62$40$00$00$00$00$00$37$37$00$04$00$00$00$00$00$00$00$01$00$00$37$37$00$04$00$00$00$20$8C$00$00$00$00$00$A0$41$CD$CC$CC$3E$38$88$13$36$37$38$39$3A$3B$3C$3D$F3$F3$6C$10$0C$C0$A8$03$01$01$00$00$50$00$C0$A8$00$0A$37$01
Enable nRF905...
Enable vwRF433...
Start Ethernet...
server is at 192.168.0.10:80
Read Config data from Eeprom...
api.thingspeak.com
KRR9Q1VJX3......
Execute Instruction...
_Inst=0
Execute Instruction...
_Inst=120
Connecting to ThingSpeak...
<<< initialize Completed >>>